Grade 5 Titanium Bar
Size in mm:5 mm To 500 mm
Diameter in mm:0.1 mm to 100 mm
Length in mm:100 mm To 3000 mm Long & Above
Surface Finish:Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance:H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients' requirements
Form:Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
Grade 5 titanium rod (Ti-6Al-4V), as the most widely used titanium alloy material, has become the core substrate in high-end fields such as aerospace, medical implants, and precision machinery due to its high strength, excellent corrosion resistance, and good processing performance. We focus on the research and production of Grade 5 titanium rods, have been deeply involved in the industry for more than ten years, and have built a full range of rod spot systems. At the same time, we provide flexible customization services, leveraging the full chain control advantages of the original manufacturer, to provide efficient and stable high-quality titanium material solutions for global customers.
| ASTM B348/ ASTM SB348 | |
| 5 mm To 500 mm | |
| 0.1 mm to 100 mm | |
| 100 mm To 3000 mm Long & Above | |
| Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish | |
| H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients' requirements | |
| Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| 3mm - 20mm | ±0.02mm | 1000mm - 3000mm | Precision turning + grinding; vacuum annealing to enhance fatigue resistance | ASTM B348, Aerospace Material Specification | |
| 2mm - 12mm | ±0.01mm | 500mm - 2000mm | Electropolishing (Ra<=0.8μm); biocompatibility testing before delivery | ASTM B348, ISO 13485, FDA/CE | |
| 1mm - 15mm | ±0.005mm | 800mm - 3000mm | Precision cutting + sandblasting; dimensional calibration after processing | ASTM B348, Industrial Precision Standard |
Different application scenarios require precise size parameters for Grade 5 titanium rods, and we have tailored our stock and customized solutions accordingly. In the field of aerospace components, spot supply of thin rods with diameters ranging from 3mm to 20mm, covering standard specifications of 1000mm to 3000mm in length, with tolerances controlled within ± 0.02mm, suitable for precision connector processing; In the medical implantation scenario, medical grade fine rods with a diameter of 2mm-12mm are commonly used, with a straightness of <= 0.1mm/m and a surface roughness of Ra <= 0.8 μ m, to meet the processing requirements of orthopedic screws and implant stents; In the field of precision machinery, the available stock covers diameters ranging from 1mm to 15mm and can be directly used for the manufacturing of high-precision gears and transmission components. All in stock items are individually packaged and can be shipped within 24 hours for urgent orders.
Grade 5 titanium rod has outstanding characteristics and is suitable for demanding requirements in multiple scenarios. This grade contains 6% aluminum and 4% vanadium, with a tensile strength of over 860MPa, a yield strength of >= 795MPa, and an elongation of not less than 10%. It combines high strength and good toughness, and can withstand mechanical loads under complex working conditions. Medical grade Grade 5 titanium rods have passed ISO 10993 biocompatibility testing, reducing the risk of metal element precipitation and adapting to long-term implantation scenarios in the human body; Industrial grade products comply with ASTM B348 standards, with excellent acid and alkali resistance, high temperature corrosion resistance, and stable service in environments ranging from -270 ℃ to 315 ℃. All products provide complete material analysis reports and performance testing data.
As a source manufacturer, our core advantage runs through the entire production and service process. Our own titanium ingot smelting and precision rolling production line achieves vertical integration from raw materials to finished products, ensuring a purity of over 99.99% for Grade 5 titanium rods; Equipped with high-precision processing equipment and vacuum annealing technology to ensure the consistency of fine rod size accuracy and performance, with performance fluctuations between batches <= 3%; The core specification of titanium thin rods has sufficient stock in stock, with spot orders being shipped out on the same day. The customized order cycle has been compressed to 7-12 days, far below the industry average level; Establish a full process quality traceability system, with a professional technical team responding to inquiries 24/7 and providing suggestions for optimizing processing technology.
Our customized services fully meet personalized needs, with special specifications for sizes ranging from 0.5mm to 50mm in diameter and adjustable lengths from 500mm to 6000mm, with tolerances accurate to ± 0.005mm.Our machining services include precision turning, grinding, cutting, etc. We can carry out machining of semi-finished products according to customer drawings;Surface treatment offers custom-tailored solutions with acid pickling passivation, electrolytic polishing, sand blasting, etc., depending on the assembly and service conditions; At the same time, we can also provide small batch customization services, the minimum order can be as low as 10 pieces, which can meet the various needs of development experiments and production, and reduce cost and increase efficiency for customers.
What are the stock specifications of Grade 5 titanium rods from your company?
Chenxin Titanium :Our stock mainly covers Grade 5 titanium rods with diameters ranging from 1mm to 20mm, with standard specifications of 1000mm, 2000mm, and 3000mm in length. It covers commonly used dimensions in three core scenarios: aviation, medical, and precision machinery.Both regular and high precision tolerance grades are in stock, can be shipped directly for fast delivery.
What is the lead time and MOQ to customize Special Diameter Grade 5 Titanium Rods?
Chenxin Titanium :The minimum order quantity for customized orders is as low as 10 pieces, which can meet the needs of research and development testing; The production cycle for conventional special diameters (0.5mm-50mm) is 7-12 days. For complex precision or long length customized orders, the technical team can determine the specific cycle after evaluation, and the efficiency is better than industry standards.
Chenxin Titanium :All grade 5 titanium rods are conform to the ASTM B348 international standard. Medical grade products are obtained ISO 13485 medical quality system and FDA, CE approval. Products for aerospace are qualified to the unique requirements of aerospace materials testing and certification packages and test reports are issued for each lot, allowing for traceable use.
Can you provide recommendations for selecting and processing Grade 5 titanium rods for different application scenarios?
Chenxin Titanium :Our technical team has rich experience in the application of Grade 5 titanium materials. Based on specific customer scenarios such as stress requirements, usage environment, and processing technology, we can accurately recommend suitable sizes and accuracy levels, and provide optimization solutions for cutting, welding, and other processing parameters to improve product yield.
Chenxin Titanium :We promise to return or exchange goods within 7 days without any reason. If customers find any quality problems after receiving the goods, they can contact after-sales service based on testing data and product photos. After technical review and confirmation, they will immediately arrange for return or exchange or priority replenishment. At the same time, we will trace the problem process and optimize the production process to ensure that the customer's production progress is not affected.
Whatsapp:+8613571718779
étiquette à chaud: grade 5 titanium bar, China grade 5 titanium bar manufacturers, suppliers, factory
Une paire de
Tige en titane médical Ti-6AL-7NbVous pourriez aussi aimer
Envoyez demande